TRONICS overview

Grenoble, France and Dallas TX, USA – June 30, 2020 - Tronics, a TDK Group Company that manufactures custom MEMS products and standard inertial sensors for industrial applications, has announced its results for the fiscal year 2020 (from April 1, 2019 to March 31, 2020). Tronics' Management Board met on June 19, 2020, and approved the accounts of its fiscal year ending on March 31, 2020, which were presented to the Supervisory Board on the same day. The annual financial report will be made...

Grenoble, France and Dallas, TX, USA – April 29, 2020 - Tronics, a TDK Group Company that manufactures custom MEMS products and standard inertial sensors, has announced its revenue for the fiscal year 2020 (from April 1, 2019 to March 31, 2020). Consolidated revenue decreased by 6%, mainly driven by the reduction of the engineering activities recorded in Crolles, France. Consolidated revenue for the fiscal year 2020 in €K (IFRS) - unaudited Fiscal year 2020 Fiscal year 2019 Annual variation...

NORTHVALE, NJ / ACCESSWIRE / February 19, 2020 / ADM Tronics Unlimited, Inc. (OTCQB: ADMT ), a technology-based developer and manufacturer of innovative technologies and products, today announced results for its third fiscal quarter ended December 31, 2019 of Fiscal Year 2020. During the last month of the fiscal quarter ended December 31, 2019 ADMT initiated production of the Calmer Canine veterinary therapy device for its customer Assisi Animal Health. In advance of the initiation of production...

Grenoble, France and Dallas, TX, USA – December 20, 2019 - Tronics, a TDK Group Company that manufactures custom MEMS products and standard inertial sensors, has announced its results for the first half of fiscal year 2020 (from April 1 to September 30, 2019). Tronics' Management Board met on December 11, 2019, and approved the accounts for the first half of fiscal year 2020 ending on September 30, 2019, which were presented to the Supervisory Board on the same day. The half-year financial...

LOS ANGELES, CA / ACCESSWIRE / December 4, 2019 / Giga-tronics Incorporated (OTCQB:GIGA) today announced that it will be presenting at the 12 th annual LD Micro Main Event on Tuesday, December 10 at 3:40 PM PST / 6:40 PM EST. Lutz Henckels, Executive Vice President & CFO will be presenting and meeting with investors. A webcast of the Company's presentation will be available using the following link: http://wsw.com/webcast/ldmicro17/giga/ "This year's Main Event is our largest event to date, with...

NORTHVALE, NJ / ACCESSWIRE / November 19, 2019 / ADM Tronics Unlimited, Inc. (OTCQB: ADMT ), a technology-based developer and manufacturer of innovative technologies and products, today announced results for its second fiscal quarter ended September 30, 2019 of Fiscal Year 2020. As previously announced, ADMT developed and is manufacturing a new veterinary therapy technology, trademarked Calmer Canine, for its customer, Assisi Animal Health. In preparation for the launch of the Calmer Canine,...

Grenoble, France and Dallas, TX, USA – October 30, 2019 - Tronics, a TDK Group Company that manufactures custom MEMS products and standard inertial sensors, has announced its revenue for first half of fiscal year 2020 (from April 1 to September 30, 2019). Consolidated revenue was nearly stable compared to the same period of last year. Consolidated revenue for the first half of fiscal year 2020 in €k (IFRS) - unaudited First half of fiscal year 2020 First half of fiscal year 2019 Half year...

NORTHVALE, NJ / ACCESSWIRE / August 19, 2019 / ADM Tronics Unlimited, Inc. (OTCQB:ADMT), a technology-based developer and manufacturer of innovative technologies and products, today announced results for its first fiscal quarter ended June 30, 2019 of Fiscal Year 2020. During the quarter ended June 30, 2019 there was an increase in revenues as ADMT began to fulfill the customer order backlog of $730,000 that was reported on ADMT’s fiscal year-end report dated March 31, 2019. During the quarter...

Grenoble, France and Dallas, TX, USA – July 17, 2019 Tronics, a TDK Group Company that manufactures custom MEMS products and standard inertial sensors for industrial applications, has announced the availability and the filing of its Annual Financial Report with the French Financial Markets Authority as of March 31, 2019. This report is available in accordance with the provisions of regulations currently in force, and can be found in the “Investors” section of the Tronics website under...

NORTHVALE, NJ / ACCESSWIRE / July 15, 2019 / ADM Tronics Unlimited, Inc. (OTCQB: ADMT ), a technology-based developer and manufacturer of innovative, proprietary medical technologies, today announced results for fiscal year ended March 31, 2019. Throughout the fiscal year ended March 31, 2019, ADMT continued its strategic plan to devote financial and technological resources to the development of its proprietary medical technologies. The increased efforts and expenditures on R&D resulted in the...

Grenoble, France and Dallas TX, USA – June 20, 2019 - Tronics, a TDK Group Company that manufactures custom MEMS products and standard inertial sensors for industrial applications, has announced its results for the fiscal year 2019 (from April 1, 2018 to March 31, 2019). Tronics' Management Board met on June 18, 2019, and approved the accounts of its fiscal year ending on March 31, 2019, which were presented to the Supervisory Board on the same day. The annual financial report will be made...

This new milestone in the Group's Corporate Quality Policy emphasizes Tronics' commitments to continuously improve its operation and product quality to satisfy its customer requirements. Grenoble, France – May 28, 2019 Tronics, a TDK Group Company that manufactures custom MEMS products and standard inertial sensors for industrial applications, announces that its facility located in Crolles, France, is now certified to the IATF 16949:2016, the international standard for automotive quality...

Grenoble, France and Dallas, TX, USA – April 25, 2019 - Tronics, a TDK Group Company that manufactures custom MEMS products and standard inertial sensors, has announced its revenue for the fiscal year 2019 (from April 1, 2018 to March 31, 2019). Consolidated revenue increased by 23%, mainly driven by the growth of the manufacturing activities recorded in Crolles, France. Consolidated revenue for the fiscal year 2019 in €K (IFRS) - unaudited Fiscal year 2019 Fiscal year 2018 pro forma Annual...

Tronics' US subsidiary now complies with the ISO 13485:2016 standard. This milestone recognizes the company's efforts to design, manufacture and sell MEMS products for diagnostic chips, in compliance with international standards specific to the medical devices industry. Grenoble, France and Dallas, TX, USA – April 10, 2019 Tronics, a TDK Group Company that manufactures custom MEMS products and standard inertial sensors, announces that its US subsidiary located in Dallas, Texas, is now...

NEW YORK, March 05, 2019 (GLOBE NEWSWIRE) -- Giga-tronics’ (OTCQB: GIGA) CFO Dr. Lutz Henckels provided an outline of GIGA’s two main product lines; Microwave components and their RADAR test business. On the Microwave component side the company achieved $7.6 million in revenue from April 1st to December 31st of last year, compared to $4.6 million over the same period the previous year. Giga-tronics also invested over $20 million in their Microwave business and recently received a $4 million...